You may be able to make some changes to your forest management plan such as:

  • updating contact or ownership details
  • amending your work programme (technical amendment)
  • changing felling licence conditions

Notify us of your change


Updating contact or ownership details

A felling permission applies to the land regardless of its owner. It remains in force, along with any conditions, after the land is sold.

Any areas felled must be restocked and maintained for 10 years. If you sell your land, you must let us know when it was sold and the new owner's details. You must also inform the new owner about the felling permission.

Making amendments to your work programme (technical amendments)

There are 3 categories of technical amendment, designed to give you operational flexibility in the first 5 years of delivering your forest management plan.

The categories apply at coupe level to:

  • thinning
  • felling
  • restocking

Category 1

You do not need to notify us of category 1 amendments. These can be carried out without approval from us. Keep records of any amendments and include them in your year 5 review form.

Category 2

You must notify us of category 2 amendments you want to make.

We need:

  • a description of what you want to amend 
  • maps or digital photos to illustrate the issue (up to 10 files of no more than 50MB each)

If we have no concerns about your proposed amendment, we will notify you that you can proceed.  

If we consider that the proposed amendment does not meet the requirements of the UKFS, we may need you to submit additional evidence or a category 3 request for formal amendment. Examples include:

  • where further spatial mapping may be needed to assess the impact of felling proposals in areas prone to flooding
  • where water catchment thresholds need to be assessed to ensure that critical load assessments are completed 
  • where biodiversity records are not publicly available

Category 3

You must notify us that you want to make a category 3 amendment. We need a brief description of what you want to do. We will send you a form to apply for formal amendment.

We will determine whether your amendment needs to go back on the public register.

Technical amendments

Adjusting felling coupe boundaries

Adjustment is to a predefined felling coupe boundaries within your existing work programme.

Area to be adjusted

Approval category

Under 10%

Category 1

10 to 25% of original coupe area

Category 2

 

Over 25% of original coupe area

Category 3


Where the coupe boundary is adjusted to create a felling area greater or less than the approved area then the entire actual area cleared of trees will be restocked.

Changes to the coupe boundary must be directly abutting or adjacent or no more than 20 metres away from the existing coupe boundary. This adjustment can only apply to predefined felling coupe boundaries within the existing work programme.

Changes from indicative felling year

Proposed indicative felling year

Approval category

1 to 4 years provided the felling year is specified and providing adjoining felled areas have reached a minimum average height of 2 metres

Category 2

Over 4 years provided the felling year is specified and providing adjoining felled areas have reached a minimum average height of 2 metres

Category 3


Where the indicative felling year of the coupe is amended then the timing of restocking will relate to the actual year of felling, not to the indicative year. Adjoining is defined by the UK Forestry Standard Guideline General Forestry Practice guideline 13 on page 18.

Changes to felling type

Proposed felling type

Approval category

Clearfelling to selective felling or thinning (where all felled areas larger than 0.01Ha will be restocked as per the agreed restocking programme

Category 1

Increased level of thinning beyond marginal thinning intensity or where the basal area will be taken below the threshold basal area.

Category 2

Change from thinning to any other type of felling

Category 3


Where an amendment to the felling type results in ground to be restocked (such as thinning to clearfelling) or more ground to be restocked (such as selective felling to clearfelling) then the entire area cleared will be restocked.

'Felling type' is defined in the regulations as thinning, selective felling, clearfelling (to include group felling), felling of hedgerow trees, felling of isolated trees, and felling of small clumps of <0.25 hectares (not forming part of a wood).

'Thinning' is the removal of a proportion of the trees in the wooded area to benefit the remaining trees not licensed to be removed and to allow the latter to continue growing and to close canopy once again.

'Marginal intensity thinning' is defined in Forestry Commission Booklet No.48.

Clearance of standing trees within partially windblown coupes within the existing programme

Proposed clearance

Approval category

For any individual coupe in your existing work programme where 80% of area is windblown, and where clearfelling and restocking has been approved

Category 2

Anything not covered above

Category 3 

 

Timing of restocking after clear or selective felling

Proposed timing

Approval

1 to 2 planting seasons after felling

Category 1

3 to 4 planting seasons after felling

Category 2

Over 4 planting seasons after felling

Category 3 

The timing of restocking will relate to the actual year of felling, not to the indicative year.

Changes to number of stems per hectare (sph)

Number of stems to be changed

Approval category

For broadleaves increasing or decreasing stocking density to within the following range:

  • broadleaves between 1100 to 2500 sph
  • conifers, between 2000 to 4000 sph
  • broadleaves between 1100 sph and 2500 sph
  • conifers, between 2000 sph and 4000 sph

Category 1

Anything not covered above

Category 2


The terms ‘increasing’ and ‘decreasing’ relate to any stems per hectare figures entered in your approved work programme.

If there are no sph figures in your approved work programme then a default position of 1100 broadleaves and 2250 conifers sph will be used in any assessments following date of approval.

Changes to proportions of broadleaves and conifers and increases in open ground

Changes to proportion of broadleaves and conifers

Approval category

No overall change in the proportions of broadleaves and conifers

Category 1

Increased proportion of broadleaves

Increased open ground to under 10% of coupe area

Category 2

 

Increased proportion of conifers

Increased open ground to more than 10% of coupe area

Category 3

Any changes to the proportions of broadleaves and conifers will conform to the UKFS and the Woodlands for Wales Strategy (especially no loss of broadleaved woodlands to coniferous woodland, and no planting of tree or shrub species that may threaten the remnant features of a PAWS (Plantations on Ancient Woodland Sites)).

Where you increase the amount of open ground you may wish to seek an Environmental Impact Assessment (EIA) screening opinion (especially for proposals that exceed relevant EIA thresholds).

The definition of open ground is as per the UKFS: areas within a forest without trees, such as glades, stream sides, grass or heathland, water bodies, rocky areas, roads and rides. 

Changing the conditions of an approved felling permission

There is no provision in the Forestry Act 1967 to amend the conditions of a felling permission but where appropriate we may choose to do so based on the public law principles of reasonableness, consideration of the relevant facts, and where both parties fully agree to the amendment.

There may be occasions where the conditions of your approved felling permission are no longer appropriate: the site conditions may have changed since felling for example or the restocking may have partially failed leaving open space. Consider the following:

  • do the changes reasonably meet the aims of the original condition
  • would this situation have been acceptable when the permission was issued, in particular no reduction in the original proportion of broadleaves and any remnant features of PAWS are protected
  • is the current restocking acceptable under the UK Forestry Standard and Woodlands for Wales
  • does the present area of woodland accord with the owner’s vision and management objectives

If the answers to these questions are overwhelmingly ‘yes’ then we will work with you to come up with amended conditions.

Your amendment may need to go back on the public register depending on the scale or nature or your proposed operations.

Publishing your plans

We will determine whether your amendment needs to go back on the public register. This is most likely where you propose a material change in the scale or nature or your proposed operations in scenarios such as:

  • additional areas of new planting or clearfelling: areas of new planting over the EIA (forestry) threshold for afforestation or further areas of clearfell outwith
  • felling and not restocking: whatever the reason including peatland restoration. An EIA (forestry) screening is will also be required. Where approved we we will enter ‘UNCONDITIONAL’ in your work programme felling permission.

The following are unlikely to need to go back on the public register:

  • amending the proportions of conifers and broadleaves: if the changes are acceptable under the UK Forestry Standard and Woodlands for Wales.
  • amending the indicative felling or restocking year: we may require you to refer to your managed landbank to demonstrate how you are managing the amount of land awaiting restocking.
  • windblow: the technical amendment categories give considerable operational flexibility to allow you to deal quickly with windblown timber. If, in the interests of good forestry, timber needs to be cleared quickly then discuss this with your regulatory woodland officer, who can approve your work by an exchange of emails. A map or annotated aerial photograph may also help. A site visit is unlikely to be required. Windblown areas must be replanted and as far as you can you should follow any approved restocking prescriptions.
Last updated