Identify and manage sensitivities
When you apply for a forest management plan you must tell us about:
- sensitivities on or adjacent to your forest management unit
- compartments affected
- risks to, and impacts on, the sensitivity and how you will manage them
- any statutory consultation required
Use this page to find out:
- which maps and datasets can help you identify sensitivities
- if you may need extra consent or permission
- if you must carry out a statutory consultation
What we mean by 'sensitivities'
Sensitivities are features, areas, species or constraints that require special consideration due to their environmental, cultural, legal or operational importance.
Approximately 30% of Wales’ land and waters are designated for wildlife, landscape or geological interest.
Other sensitivities include protected species, historic features, veteran trees, hedgerows, watercourses, access routes and infrastructure.
How your plans might affect the sensitivity
Forest management activities such as felling, restocking, construction and chemical use have the potential to impact sensitivities directly or indirectly.
We must be satisfied that your proposals will not adversely affect the integrity of sensitivities before approving your forest management plan.
You need to determine how your plans might impact the sensitivity and understand what the risks are.
Do not limit your assessment to sensitivities within your forest management unit. Your planned works may impact sensitivities some distance away. For example, consider how:
- your proposed activities might impact the condition status of a designated site
- forest drains or watercourses within your forest management unit might connect to a designated watercourse
- your proposed activities might impact protected species within your forest management unit
- vibration from machinery might impact scheduled ancient monuments
Consultation
Some sensitivities trigger statutory consultation.
The UK Forestry Standard states that it is good practice to undertake stakeholder engagement where your plan is likely to impact sensitivities.
It is your responsibility to make contact with statutory authorities or wherever else there is a requirement to consult or notify.
Identifying sensitivities
Use our interactive map viewer as a starting point to identify sensitivities.
Find other other maps or data sources under each sensitivity.
Where mapped data is insufficient, you should use site surveys, professional advice and other datasets. An absence of records does not confirm absence of a sensitivity.
1. Designated sites
Check our interactive map viewer to find out if your forest management unit is on or adjacent to:
- Special Area of Conservation (SAC)
- Special Protection Area (SPA)
- Ramsar site
- Site of Special Scientific Interest (SSSI)
- National Nature Reserves (NNRs)
You do not need to carry out a statutory consultation.
We will assess impacts on designated sites through a Habitats Regulations Assessment, where required.
Find out more about protected areas of land.
2. Landscape and historic designations
National landscapes (formerly AONBs)
Find national landscapes on:
Consult with the relevant local authority national landscape team.
Local authority conservation areas
Find conservation areas on:
Consult with the relevant local planning authority. Tree works may require consent.
Historic parks and gardens
Find registered historic parks and gardens on DataMapWales.
Consult Cadw where character or setting may be affected by your proposed works.
National parks
Find national parks on:
Consult the relevant national park authority, particularly where access, visibility or planning considerations apply.
Scheduled monuments
Forestry operations can damage both below and above-ground remains.
Find scheduled monuments on:
Consult Cadw if there are scheduled monuments on or adjacent to your forest management unit. You may need scheduled monument consent.
Military remains
Military aircraft crash sites and certain military remains are protected under the Protection of Military Remains Act 1986.
Consult the Ministry of Defence. Consult Cadw if remains are scheduled.
Ancient woodland sites
Ancient woodland has existed continuously since at least 1600 AD and includes:
- Ancient Semi-Natural Woodland (ASNW)
- Restored Ancient Woodland Sites (RAWS)
- Ancient Woodland Sites of Unknown Category
Find ancient woodland sites on our interactive map viewer.
You do not need to carry out a statutory consultation.
Plantation on Ancient Woodland Site (PAWS)
PAWS are ancient woodlands that have been planted with non-native tree species.
Ancient woodland soils, seed banks and ecological features may present restoration opportunities.
Find PAWS on our interactive map viewer.
Where your forest management unit is on or adjacent to PAWS, you must complete and upload the PAWS Assessment Form in support of your application.
You do not need to carry out a statutory consultation.
Deep peat
Peat soils 50cm or deeper provide critical carbon storage and hydrological functions. Restocking may be inappropriate.
Find out how to carry out a deep peat assessment [link to new page].
You do not need to carry out a statutory consultation.
Veteran trees
Veteran trees are irreplaceable ecological and cultural woodland features. You must ensure that forestry operations avoid physical damage or indirect impacts to veteran trees.
You do not need to carry out a statutory consultation.
Deadwood
Deadwood supports specialist species and is a key component of woodland ecosystems.
You do not need to carry out a statutory consultation.
Linear features, access and infrastructure, hedgerows
Some hedgerows are protected under the Hedgerows Regulations 1997. Hedgerows provide habitat, food and movement corridors for a wide range of species and can have historic and cultural significance.
Consult the local planning authority for removal.
Watercourses
Watercourses include rivers, streams, drains, ponds and lakes.
Find watercourses on:
?
Forestry operations may affect water quality or hydrology.
You may need permission from us if you intend to carry out works:
- on an ordinary watercourse (such as culverting) within an Internal Drainage District (land drainage consent)
- on or near a main river or in a flood plain (a flood risk activity permit)
To carry out works on an ordinary watercourse not within an IDD you may need ordinary watercourse consent from the relevant local authority.
Tree Preservation Orders
Tree Preservation Orders (TPO) protect trees of amenity or cultural value. A TPO makes it an offence to cut down or undertake tree surgery on a protected tree without permission, unless an exemption applies.
Approval of a forest management plan does not override the need for TPO consent.
Check if a TPO exists with the relevant local authority.
Consult the relevant local authority.
Public Rights of Way
You will need local authority consent for temporary closures.
Council roads
You may need local authority consent for to use public highways for access and haulage as Temporary Traffic Regulation Orders may be required.
Wayleaves
Consult the infrastructure owner.
Open areas
Priority habitats
Priority habitats are non-wooded areas within woodlands and forest landscapes identified under Section 7 of the Environment (Wales) Act 2016 as habitats of principal importance for the conservation of biodiversity in Wales.
You do not need to carry out a statutory consultation.
Tracks and rides
Open and edge habitats benefiting a wide range of species.
You do not need to carry out a statutory consultation.
3. Planning and development proposals
Existing or proposed developments may constrain forest operations.
Consult the local planning authority.
4. Protected species
Protected species legislation applies regardless of current presence.
Where impacts cannot be avoided, you may need a licence from us.
Find out more in check if you need a wildlife licence during forest operations.
5. Invasive species
Forestry operations must not cause spread of invasive species.
Read more about invasive non-native species in woodlands.
6. Plant and tree health
Phytophthora ramorum
Suspected cases must be reported via TreeAlert.
If your FMU contains larch, we will issue a Statutory Plant Health Notice (movement on request) by default along with your approved forest management plan. This notice will include a schedule of measures to be taken. To move felled infected material from site you, your haulier or the timber merchant who buys your timber will require a movement licence from Forestry Commission Plant Health Team.
If you do not wish to receive an SPHN(mr) on uninfected larch, you can request a larch inspection as part of your application. NRW will inspect your larch for infection between 1st April and 31st August, when larch is in leaf and P. ramorum infections are observable.
We may or may not inspect your trees before issuing your SPHN[mr] but will always do so if we suspect your trees are infected. If confirmed then we will issue you with a full Statutory Plant Health Notice (SPHN) requiring you to destroy them. If you choose to fell them (rather than destroy them by other means (such as stem injection) then your permission to fell will be under the notice rather than the felling permission issued with your approved forest management plan. Permission to fell all other trees will remain under your approved plan.
Ips typographus
A high-risk quarantine pest of spruce. Report suspected cases via TreeAlert.
Complete the sensitivities form
Download the sensitivities form.
For each sensitivity, you must:
- indicate whether it lies within or adjacent to the FMU
- identify affected compartments
- provide the site name or description
- describe potential impacts and risks
- set out mitigation measures
- record consultation requirements
In or adjacent to the forest management unit
You need to identify whether the sensitivity is within or adjacent to the forest management unit.
If the sensitivity is partially within it, select “yes”. If the sensitivity is neither within nor adjacent to it but is functionally connected to it - or operations may have off-site effects - select “no”.
Compartments (Cpts) affected
You need to list:
- all compartments that are within or adjacent to the sensitivity
- all compartments that are functionally linked to the sensitivity
- sites with planned operations which could have off-site effects on the sensitivity
Name of site/description of sensitivity
You need to identify the name of the site.
You can do this by loading the appropriate data layer on DataMapWales, and click within the boundary of the sensitivity to reveal the name.
For sites without a specific name, write a brief description of the sensitivity.
How you will reduce the impacts and risks
For each sensitivity where you’ve identified an impact and risk, you need to outline what action you will take to reduce their magnitude and likelihood.
Habitat Regulations Assessments we may carry out
Activities which might affect SSSIs, SACs, SPAs or Ramsar sites must be assessed to understand their potential impacts. This is known as a Habitats Regulations Assessment (HRA) and is undertaken by us.
We will decide whether an HRA is required based on the potential impact of your forestry works on the conservation objectives of the qualifying features for which the site was classified.
If we determine that an HRA is needed, it will consider the site sensitivities, the likelihood and magnitude of impacts caused by proposed forestry works on the site’s features, and how the risks will be mitigated.
The information you provide in the sensitivity form will inform our HRA decision.